It takes up to 48 hours to generate your
registration key and it is a prerequisite that
the 3f Software Planner is installed.
Step 1. Get the Installation Key
1. Start the Registration utility
2. Get installation key
The Installation Key is used by us to create the
Registration Key.
1. Click the button "Generated
Installation Key".
2. From the subsequent dialog box, copy
the entire key either by highlighting it,
or clicking the button "Copy to
clipboard".
IMPORTANT:
Check off the modules you want to use
while your registration key is being
processed. When you receive your
registration key you will also receive an
Activation Key that will activate the
module(s) you have purchased.
3. Installation key submission. To submit
the installation key go to:
http://www.3fsoftwareplanner.com/submit/
Once we have received your installation
key we will process your registration key
within 48 hours. Note that the system will
run for 3 days without a registration key.
Step 2. Enter your
registration key (once you have
received it from us)
1.
Start the Registration utility
2. Choose the tab "Register Your Product", then
paste the key you received into the "Register Your Product" field.
Next click the Register button.
3. When you see the message box below, the system is
registered and ready to be used.
Keyword
registration, register, key, registration
key, installation key, installation,
install, setup, install guide, setup
guide, installing, troubleshooting
installation, troubleshooting setup
